Call us at 717-375-1025

2018 Conquest 8×8 XT

2018 Conquest 8×8 XT

With seating for two people and a large cargo area, this XTV is ideal for hauling materials and equipment to remote work sites. The XT can carry up to 905 lbs. and tow up to 2,000 lbs. A 30 HP water-cooled, fuel injected Kohler Aegis V-twin provides reliable performance in a wide range of operating conditions, while front and rear mounts allow the included 4,500 lb. Warn winch to be used at either end of the vehicle to pull up equipment and move obstacles. This model uses Argo’s Admiral transmission with a choice of standard or high torque final drive, giving buyers the choice between top speed or maximum hauling and hill climbing power. 

2018 Conquest 8×8 XT Overview

  • Engine – Kohler V-Twin, liquid cooled
    30 HP
  • Engine – Kohler 3 Cyl L/C Diesel
    24 HP
  • Transmission (CLASSIC)
    N/A
  • Transmission (ADMIRAL)
    STD
  • Tires – diameter (steel off-set rims)
    25″
  • Load capacity – on land
    1190 lb (540 kg)
  • Towing capacity
    2,000 lb. (907 kg)
  • Seating (on land/on water)
    2 or 4 OPT / 2
  • Warn 3,500 lb. winch (front mounted)
    STD
  • Brushguard
    STD
  • Skid plate (full length)
    STD
  • Bilge pump
    STD
  • Entry step (single)
    STD
  • Brake cooling fan
    OPT-DLR
  • Axle Bearing Extensions
    STD
  • Alternator
    60 AMP

2018 Conquest 8×8 XT Colors

  • Industrial Yellow

2018 Conquest 8×8 XT Specs

  • Engine
    Kohler Aegis
  • Engine Warranty
    3 year
  • Engine Type
    4 cycle OHV gasoline-powered engine features electronic fuel injection (EFI), full pressure lubrication and V-twin cylinders.
  • Horsepower
    30
  • Displacement
    1028 cc
  • Cooling
    Liquid Cooled
  • Alternator
    65 amp
  • Service Brakes
    Hydraulic
  • Steering Brakes
    Hydraulic
  • Brake Cooling Fan
    Optional
  • Steering
    Multi position, One-piece.
  • Controls
    Right-hand twist grip throttle. Dash mounted light and ignition switch.
  • Clutch
    Belt-driven, Continuously Variable Transmission (CVT) maximizes engine power to the transmission
  • Transmission
    Admiral
  • Transmission Option
    STD
  • Drive System
    Chain drive to machined sprockets. 1 3/8” diameter axles with triple sealed greaseable outer bearings
  • Final Drive
    RC50-2 and RC60 roller chain drive to all 8 axles
  • HD Drive Belt
    Standard
  • Frame
    Formed steel channel frame, welded for high strength and durability. Protected with Bonderite® epoxy-acrylic base coat, textured black epoxy top coat.
  • Body
    Vacuum formed High Molecular Weight Polyethylene (HMWPE) one-piece lower body.
  • Full Skid Plate
    Standard
  • Brushguard
    Standard
  • Winch
    4,500 lb. Warn Winch & Rear Receiver Winch Kit
  • Bilge Pump
    Standard
  • Load Capacity – Land
    905 lb. (411 kg)
  • Load Capacity – Rear Compartment
    —–
  • Load Capacity – Water
    860 lb. (390kg)
  • Towing Capacity
    2,000 lb. (907 kg)
  • Seating Capacity – Land
    2
  • Seating Capacity – Water
    2
  • Fuel Capacity
    7.1 US gallons (27 litres) See-through polyethylene fuel tank. 8 hrs. operation.8
  • Speed – Land
    17 mph (27 km/h)
  • Speed – Water
    3 mph (5 km/h)
  • Shipping Weight
    2,195 lb. (996 kg)
  • Length
    132 in (3,353 mm)
  • Width
    65 in (1,651 mm)
  • Height
    79 in (2,007 mm)
  • Axle Bearing Extensions
    Standard
  • Instrumentation
    LCD digital gauge cluster: speedometer, odometer, voltmeter, hour meter, tachometer, low oil pressure, parking brake reminder lights and check engine light. LCD Digital Gauge Cluster: Speedometer, Odometer, Voltmeter, Hour Meter, Tachometer. Low Oil Pressure, Check Engine and Parking Brake Reminder Lights
  • Entry Step
    No
  • Tires
    Argo AT189 25×12.00-9 NHS
  • Ground Pressure
    2.5 psi (17.2 kPa) using tires
  • Ground Clearance (Tires)
    9 in (229 mm)
  • Ground Clearance (Tracks)
    10 in (254 mm)
  • Operating Conditions
    All weather, all terrain, -40°F to +104°F (-40°C to +40°C)
  • Warranty
    1 Year