2018 Conquest 8×8 XT-X

2018 Conquest 8×8 XT-X

Built for moving loose materials in hazardous areas, this vehicle comes with a steel power dump box rated for 1,000 lbs. (450 kg) and a ROPS with a roof, windshield, and rear mesh. The XT-X can carry up to 1,055 lbs. (479 kg,) and tow up to 2,000 lbs. (907 kg.) Dual mode headlights and floodlights provide excellent visibility, while a 30 hp Kohler Aegis V-twin and an Admiral transmission give this vehicle the power and control to handle any surface. The 4,500 lb. (2,041 kg) Warn winch can attach to the XTV’s front or rear to rescue equipment.

2018 Conquest 8×8 XT-X Overview

  • Engine – Kohler V-Twin, liquid cooled
    30 HP
  • Engine – Kohler 3 Cyl L/C Diesel
    24 HP
  • Transmission (CLASSIC)
    N/A
  • Transmission (ADMIRAL)
    STD
  • Tires – diameter (steel off-set rims)
    25″
  • Load capacity – on land
    1,055 lb. (479 kg)/div>

  • Towing capacity
    2,000 lb. (907 kg)
  • Seating (on land/on water)
    2 / 0
  • Warn 3,500 lb. winch (front mounted)
    STD
  • Brushguard
    STD
  • Skid plate (full length)
    STD
  • Bilge pump
    STD
  • Entry step (single)
    STD
  • Brake cooling fan
    OPT-DLR
  • Axle Bearing Extensions
    STD
  • Alternator
    60 AMP

2018 Conquest 8×8 XT-X Colors

  • Industrial Yellow

2018 Conquest 8×8 XT-X Specs

  • Engine
    Kohler Aegis
  • Engine Warranty
    3 year
  • Engine Type
    4 cycle OHV gasoline-powered engine features electronic fuel injection (EFI), full pressure lubrication and V-twin cylinders.
  • Horsepower
    30
  • Displacement
    747 cc
  • Cooling
    Liquid Cooled
  • Alternator
    60 amp
  • Service Brakes
    Hydraulic
  • Steering Brakes
    Hydraulic
  • Brake Cooling Fan
    Optional
  • Steering
    Multi position, One-piece.
  • Controls
    Right-hand twist grip throttle. Dash mounted light and ignition switch.
  • Clutch
    Belt-driven, Continuously Variable Transmission (CVT) maximizes engine power to the transmission
  • Transmission
    Admiral
  • Transmission Option
    STD
  • Drive System
    Chain drive to machined sprockets. 1 3/8” diameter axles with triple sealed greaseable outer bearings
  • Final Drive
    RC50-2 and RC60 roller chain drive to all 8 axles
  • HD Drive Belt
    Standard
  • Frame
    Formed steel channel frame, welded for high strength and durability. Protected with Bonderite® epoxy-acrylic base coat, textured black epoxy top coat.
  • Body
    Vacuum formed High Molecular Weight Polyethylene (HMWPE) one-piece lower body.
  • Full Skid Plate
    Standard
  • Brushguard
    Standard
  • Winch
    4,500 lb. Warn Winch & Rear Receiver Winch Kit
  • Bilge Pump
    Standard
  • Load Capacity – Land
    1,055 lb. (479 kg)
  • Load Capacity – Rear Compartment
    —–
  • Load Capacity – Water
    Not Amphibious
  • Towing Capacity
    2,000 lb. (907 kg)
  • Seating Capacity – Land
    2
  • Seating Capacity – Water
    —–
  • Fuel Capacity
    7.1 US gallons (27 litres) See-through polyethylene fuel tank. 8 hrs. operation.8
  • Speed – Land
    17 mph (27 km/h)
  • Speed – Water
    3 mph (5 km/h)
  • Shipping Weight
    2,045 lb. (928 kg)
  • Length
    132 in (3,353 mm)
  • Width
    65 in (1,651 mm)
  • Height
    79 in (2,007 mm)
  • Axle Bearing Extensions
    Standard
  • Instrumentation
    LCD digital gauge cluster: speedometer, odometer, voltmeter, hour meter, tachometer, low oil pressure, parking brake reminder lights and check engine light. LCD Digital Gauge Cluster: Speedometer, Odometer, Voltmeter, Hour Meter, Tachometer. Low Oil Pressure, Check Engine and Parking Brake Reminder Lights
  • Entry Step
    No
  • Tires
    Argo AT189 25×12.00-9 NHS
  • Ground Pressure
    2.5 psi (17.2 kPa) using tires
  • Ground Clearance (Tires)
    9 in (229 mm)
  • Ground Clearance (Tracks)
    10 in (254 mm)
  • Operating Conditions
    All weather, all terrain, -40°F to +104°F (-40°C to +40°C)
  • Warranty
    1 Year