The Frontier 8×8 Responder S is built for search and rescue missions and emergency situations. It can seat up to 3 with the stretcher and 6 without. The 8×8 Responder S is powered by a 26 HP Kohler V-Twin engine and has a maximum load capacity of 790 lb.
*Picture does not represent actual vehicle
Frontier 8×8 Responder S Overview
• 26HP Kohler Air Cooled Engine
• 25” Steel Off-Set Rims
• Skid Plate
• Bearing extensions
• Bilge Pump
• Entry Step
• 3500 lb Warn Winch
• Brushguard
• Brake Cooling Fan
• HD Drive Belt
• 1ST Responder Package (Rear Receiver Winch Kit, Brake/Tail Lights, Folding Seat, Stretcher Frame)
• Transmission Options: HT (34-100-3.3) and STD (34-100)
Frontier 8×8 Responder S Colors

Frontier 8×8 Responder S Features

Frontier 8×8 Responder S Specs
| Engine |
Kohler Command Pro |
| Engine Warranty |
3 Year |
| Type |
4 cycle OHV gasoline-powered engine features electronic fuel injection (EFI), full pressure lubrication and V-twin cylinders |
| Horsepower* |
26 |
| Displacement |
747cc |
| Cooling |
Air cooled |
| Service Brakes |
Mechanical |
| Steering Brakes |
Hydraulic |
| Brake Cooling Fan |
Standard |
| Steering |
One-piece ergonomic handlebar steering control with mounted brake lever. For safety and ease of handling, the ARGO steering transmission provides continuous torque to all axles. |
| Controls |
Right-hand twist grip throttle. Light switch and ignition switch. |
| Clutch |
Belt-driven, Continuously Variable Transmission (CVT) maximizes engine power to the transmission. |
| Transmission |
CLASSIC with High and Low range; Forward, Neutral, Reverse. |
| Transmission Options |
STD or HT |
| Drive System |
Chains drive machined sprockets. 1 1/4″ diameter axles with triple sealed greaseable outer bearings. |
| Final Drive |
RC50-2 and RC60 roller chain drive to all 8 axles |
| HD Drive Belt |
Standard |
| Frame |
Formed steel channel construction, welded for high strength and durability. Polyester powder coated for lasting protection. |
| Body |
Vacuum formed High Molecular Weight Polyethylene |
| Full Skid Plate |
Standard |
| Brushguard |
Standard |
| Winch |
3,500 lb Warn Winch |
| Bilge Pump |
Standard |
| Load Capacity – On Land |
790 lb. /358 kg total |
| Load Capacity – Rear Compartment |
— |
| Load Capacity – On Water |
790 lb. / 358 kg total |
| Towing Capacity |
1400 lb. / 544 kg |
| Seating Capacity |
6 persons on land, 4 persons on water |
| Fuel Capacity |
7.1 US Gallons (27 litres) See through polyethylene fuel tank. 8 hours of operation. |
| Speed (on land) |
19 mph / 30 km per hour |
| Speed (on water) |
3 mph / 5 km per hour |
| Shipping Weight |
1260 lb. / 572 kg |
| Axle Bearing Extensions |
Standard |
| Instrumentation |
LCD Digital Gauge Cluster, Speedometer, Odometer, Voltmeter, Hour Meter, Tachometer, Low Oil Pressure and Parking Brake Reminder Lights, Check Engine Light |
| Entry Step |
Standard |
| Tires |
ARGO AT189 25x 12.00-9NHS |
| Ground Pressure |
2.5 psi (17.2 kPa) using tires |
| Ground Clearance Tires |
9.5 inches – 240 mm |
| Ground Clearance Tracks |
10.5 inches – 265 mm |
| Operating Conditions |
All weather,all-terrain,-40°C to +40°C |
| Dimensions |
 |
*subject to change without notice